One answer to all floor heating troubles: Spirovent
By circulating hot water through the tubes that are laid under the floor, the room gets heated up during freezing temperatures in very cold countries. The general problem faced by the people is the gurgling noise, frequent purging and bleeding. The corrosion is one issue because of which parts of the system need to be replaced which may involve lot of money. The cause for all this is the air present in the water. The air mixed with water should be removed to eliminate these problems. The air present may take the form of bubbles or isolated pockets and may cause pipeline blockades too.
Use of Spirovent Air Eliminators is an ideal way to get rid of all such troubles. It is fabricated in brass and has a strong and sturdy body. The warranty offered is twenty years which makes it a reliable choice. They come in varied sizes to meet varied requirements of domestic and commercial applications. They can also be custom made to suit specific requirements. The system can handle high velocity movement too which makes it one of the most desirable systems. The larger ones which are designed to handle greater volumes of water are made of steel. Spirovent system when installed ensures increased efficiency thereby significantly reduce energy consumption.
The mechanism used is very simple but unique. No other air separator could achieve such high level of success. The air gets separated while passing through a special tube made of copper. A wire mess also made of copper is soldered to the inner walls of the tube. It is then filled with the medium. When the water and air mixture is passed through the tube at low velocity, ample amount of opportunity is given to air to bind with the medium and rise. The tiniest of the air bubbles can be eliminated from the system to give 99.6 percent air free water.
The spiratube used in the Taco Air Separators is patented. Once the air is separated, it is thrown out with the use of an air eliminator. The release mechanism used is simply exceptional. The whole system increases the working efficiency of hydronic heating. The air eliminator and the separator together have effectively eradicated the problem of frequent purging and bleeding.
Many competitors have tried other technologies but could not reach to the standards set by spiotherm. Methods like centrifuging were tried to separate air from water which did not yield satisfactory results. Spirotherm is one answer to all the troubles that a floor heating system may face.
