The macerating toilet is similar in appearance to standard toilet with only difference that it is incorporated with a pumping unit that is being used to transfer flush water against gravity direction to sewer or soil stack. The pump is obtainable in form of small box that is placed right at back of the toilet and against to rear wall. The pump is made with macerating blades that shred down waste and turns it to liquefied form. The shredded waste is then further forced upward to the discharge pipes that further move it to the soil stack or central sewer line.
Installing such units is very simple. They can be fixed on smooth, finished floor areas or in any convenient space such as basement, garage or any additional spare room in house. In order to secure accurate installation, it is essential for users to make sure that the space and area where it is to be installed is precisely selected. Homeowners, who reside in remote locations that are below or above ground floor area or live in places which are not favored with gravitational force, may get these macerating toilet installed in their residents.
While installing such systems, it is essential for users to go for an elbow sewer line that is placed at 45 Degree rather than going for a 90 Degree line. These units also require power connection and so must be placed to an area where there is a suitable plug for the cord. In addition to this, the supply hose of the system must be connected to fill valve of toilet so that it is possible to have uninterrupted flow of water supply. The pump requires to be connected with gravity feed drain tubes that can be taken from bathroom sinks to inlet tubes of toilet system. It is therefore very easy to install Liberty Ascent II Toilet Systems and people can install then according to their own preferences.
Feb 8th, 2012
