Radiant Heat USA Rotating Header Image

Takagi T-K3

The Takagi T-K3 is very safe

Jun 17th, 2010
by admin.
Comments are off for this post

Takagi T-K3

Takagi T-K3

The Takagi T-K3 is one of the smallest units that are being used for the purpose of water heating. It has a very advanced design which takes scare of almost everything. All the controls are computer operated and there are almost no chances of error. The Takagi T-K3 is a very safe machine. It has an advanced system of circuits and sensors which constantly monitor the gas levels, water levels, over heating, under heating, freeze conditions and the venting conditions as well. The highly advanced safety system gives a peace of mind to the people who use the Takagi T-K3.

The Takagi T-K3 also comes with specially designed heating blocks that prevent the freezing and in turn save the heat exchanger from any kind of damage. The Takagi T-K3 ignites automatically to avoid any ignition hazards. These Takagi T-K3 water heaters are very energy efficient as well. These help to considerably reduce the monthly bills of the people using it for the less use of gas for heating.  The expenditure on the heaters gas makes almost twenty percent of the monthly bill of a person. It is complete value for money which helps one to further save money in the future.

Selecting the right venting parts for your Takagi water heater.

Gas water heaters

May 12th, 2010
by admin.
Comments are off for this post

Gas water heaters

In the residential water heating system, accommodation often equipped with special heat sources – well-known and long gas water heaters (boilers) DM AGW, AUGV, AOGV. All of these heaters on and off the main burner (by opening or stop the flow of gas to the burner) are carried out automatically by the thermostat.

AGV – capacious water heaters to 80 and 120 liters, the power of 7 and 29 kW at an efficiency of 81 … 83%. AOGV – is small and metal content.
AKGV – dual function apparatus destination: for space heating with heat losses to 18,5 kW, and at the same time for hot water flats.

Gas tankless water heaters

They are used in air heating systems of buildings as additional sources of heat in combination with other heating systems installations. Here the heat of combustion is transferred wholly or partially cold outside air, heated by the apparatus. In the heat transfer through the wall of efficiency ramjet, or circulating air reaches 70 … 90%. In the mixing apparatus by direct mixing of combustion products and heated air increases the efficiency up to 100%. Known direct-flow heaters relatively low power (50 kW, 70 … 2000 m3 / h at a temperature of 50 … 700 C) and more powerful (450 kW, up to 16000 m3 / h air at a temperature of 100 … 1100).

The Takagi T-K3 is amazing

Feb 28th, 2010
by admin.
Comments are off for this post

The Takagi T-K3 is a water heater that does not have a tank with it. It is a very compact model and has an exceptional capability to deliver two hundred and fifty eight gallons of hot water every hour. Having no tank with it enables the Takagi T-K3 to deliver an unlimited amount of hot water through out the day. For this reason it is used for both domestic as well as commercial sites. The size of the Takagi T-K3 is around 2.2 cubic feet which is nearly the size of a suitcase. The small size makes it ideal to be installed in those paces where there are space constraints.

The Takagi T-K3 like other Takagi products is made out of very durable and robust materials.  The water ways are made out of copper and brass and the burners are made out of stainless steel with a rust resistant epoxy powder coating. The best part is that the water is heated only when it is required. This helps to save a lot of energy as in the other models with tanks have to store hot water even if it is not required.  The advanced and special computer controls help save up to fifty percent of the utility costs too.


pex