Radiant Heat USA Rotating Header Image

Taco 0013

Stainless Steel Taco pumps 007, 006, 0013 for aggressive environments

Dec 14th, 2010
by admin.
Comments are off for this post

Such pumps are often used in the manufacture of varnishes and paints, because of their ability to work as sensitively with sufficiently high performance. Such sensitivity is achieved due to the fact that at the pump are no rubbing parts. This means that heating and arcing are eliminated, and such pumps is quite possible to pump flammable liquids.

Depending on the needs of the production performance of the same diaphragm pump can range from 2.5 liters per hour to 16 cubic meters per hour. Metering Taco Stainless Steel pumps are characterized by the following indicators of service life:
- Taco 007 Average service life of pump equipment – 10 years or more;
- Taco 009 Average service life before overhaul – about 40,000 hours;
- Taco 0013 The specified service life before overhaul – 25,000 hours;
Lifetime – mode MTBF – 3350 hours.

In addition to the chemical and petrochemical industries dosing diaphragm pumps are widely used in the production cycles of water treatment plants. Each stage of water purification from pollutants requires precise control of parameters and a clear dosage of cleaning components. As a rule, municipal wastewater treatment plants the water is treated with chlorine (chlorinated) or fluorosilicic acid (fluorinated). The latter component has a particularly strong destructive action and work with it requires just Taco pumps 007, 006, 0013 models.

Manual control is not always possible and convenient, so often, these pumps are equipped with remote control unit or frequency converters. For example, pumps Taco 007, Taco 006, Taco 0013 may be equipped with automatic remote control devices filing. If the pump is equipped with such device, in its labeling is present the letter IFC.

Like any other equipment, diaphragm pumps require periodic scheduled maintenance, which is the replacement of component parts on a particular schedule.

Energy saving technologies in circulating pump equipment based on Taco 0013 pump

Dec 14th, 2010
by admin.
Comments are off for this post

One of the most important issues to the consumer using Taco 0013 pumps, the power consumption and enegoeffektivnost. After all, the less energy is Taco pump, providing the necessary power, the more money you can save over its entire life. How to orient in the abundance of the proposed equipment?
The global rating for energy efficiency

To assess the energy efficiency of the Taco pumping equipment used classification of Energy Labeling. Energy efficiency according to this system reflects the labeling using digits from 00R oo3 to oo14. If marked Energy Labeling can imenvironmenttely evaluate the energy saving properties of the pump.

Note that the difference in energy consumption between the neighboring classes of about 20% from the accepted standard for the energy class 0013 ifc. At the moment the most widely used pumps, related to the class 009 and 0013, and in private housing are usually installed equipment with lower-class energy efficiency. We note that at present such a situation exists not only in Canada, but also in the U.S., EU and other countries. But after a few years, the situation may be reversed.

In 2013, according to the order of the EU at all thermal facilities should be installed circulating pumps with the highest power class 006, experts say that this upgrade will save up to 30% of the energy spent on heating.

Circulation Pumps

Dec 14th, 2010
by admin.
Comments are off for this post

Circulating pumps are a very special class of equipment to reduce power consumption. Among them it is worth noting pumps Taco 007 and Taco 0013, which allow to reduce power consumption by more than 50%. Their task is to ensure a minimum temperature difference between the coolant supply and return stroke. These pumps provide rapid movement of coolant through the pipes.

As a result, on the one hand, increases the heat transfer coefficient (the rate of cooling or heating facilities will be higher). On the other hand, due to high flow rate, coolant inlet to the heater (cooler) remains sufficiently hot (or cold), compared with the output. As a rule, as a lubricant in the pump is pumped environment.

Circulator pumps are working in a wide range of coolant temperature ranging from -10 0 C and ending with 95 0 C and used as a cooling and in heating systems. They are quite compact and quiet.

In addition to reducing energy consumption such pumps prevent such unpleasant phenomena, the low-temperature corrosion is occurring in the boiler due to the difference in temperature of the liquid-coolant inlet and outlet of the boiler.

Advantages of using the Taco 0013 pump

Nov 17th, 2010
by admin.
Comments are off for this post

The Taco 0013 pump has been a fantastic tool for most plumbing and heating systems ever since it first entered the market. It is a hardy, powerful and efficient pump capable of pumping water for domestic and small scale commercial use. Today, the pump is available all over the world and has become a household name in the plumbing world. Its popularity has rises to such heights because of the advantages it holds over other pumps.

One of those advantages is efficiency. Highly powerful, the pump operates with head range varying from 0 to 34 feet yet it uses remarkably little power to do so. When it is on single phase, the pump operates on 155 volts at a frequency of 60 Hz. This means it only requires 1.40 Amps of electric current to operate. For someone who may not understand the Physics, this roughly translates to one word: awesome!

Another significant advantage it has is cost of repair. The Taco pump has replaceable parts, meaning when one part of the machine fails a user does not have to replace the entire machine. Its parts can be bought and installed separately, as this is the way the machine was designed. These removable parts are also extremely easy to remove and replace. These facts reduce cost of repair in two ways: removable parts are cheaper to buy than the whole machine; ease of removing and replacing parts does not require one to hire a plumber to do the repairs for him or her. If, however, the person wishes to have an expert do the repair, getting one is not difficult since most repairmen have used or repaired this pump at least once before.

The Taco 0013 pump with Integral Flow Check is also extremely durable. It is designed in such a way that it is utterly shock proof. It is also designed using bronze, stainless steel or reinforced iron, making it lightweight yet hardy. The self-lubricating cartridge has also helped a great deal in maintaining the life of the machine for long periods. Most experts recommend the use of this pump to most people looking for a pump that can be relied on to perform. It is a good value for money.


pex